Analytical Estimation of Radiation Mode Radar Cross Section (RCS) of Phased Arrays Avinash Singh., Deepa K Sasidhaan., Hema singh.
Urban Heat Island studies: Current status in India and a comparison with the International studies Veena, K., Parammasivam, K.M., Venkatesh, T.N.
Effect of incident microwave frequency on curing process of polymer matrix composites Rao, S., Vijapur, L., Prakash, M.R.
Present status and future prospects of plasma sprayed multilayered thermal barrier coating systems Lashmi, P.G., Ananthapadmanabhan, P.V., Unnikrishnan, G., Aruna, S.T.
Improvement in piezoelectric properties of PLZT thin film with large cation doping at A-site Antony Jeyaseelan, A., Dutta, S.
Composites airframe panel design for post-buckling An experimental investigation Nadeem Masood, S., Viswamurthy, S.R., Gaddikeri, K.M.
Wind profile estimation during flight path reconstruction Khadeeja Nusrath, T.K., Singh, J.
Sputter deposited p-NiO/n-SnO2 porous thin film heterojunction based NO2 sensor with high selectivity and fast response S., K.M., Jose, A.S., Prajwal, K., Chowdhury, P., Barshilia, H.C.
3D localisation of target using elevation angle algorithm with the use of ground radars Raju, R.G., Kashyap, S.K.
Global spectral analysis for convection-diffusion-reaction equation in one and two-dimensions: Effects of numerical anti-diffusion and dispersion
Sengupta, S., Sengupta, T.K., Puttam, J.K., Vajjala, K.S.
A novel rate based methodology for creep fatigue life estimation of superalloys Barat, K., Sivaprasad, S., Kar, S.K., Tarafder, S.
Enhanced photothermal conversion in nanometric scale MoOx multilayers with Al2O3 passivation layer Sheth, K., Kondaiah, P., Niranjan, K., Bysakh, S., Srinivas, G., Barshilia, H.C.
Influence of solid lubricants addition on the tribological properties of HVOF sprayed NiMoAl coating from 30 °C to 400 °C Davis, D., Singh, S., Srivastava, M.
Solid particle erosion and corrosion resistance performance of nanolayered multilayered Ti/TiN and TiAl/TiAlN coatings deposited on Ti6Al4V substrates Bonu, V., Jeevitha, M., Praveen Kumar, V., Srinivas, G., Siju, Barshilia, H.C.
Effects of numerical anti-diffusion in closed unsteady flows governed by two-dimensional Navier-Stokes equation Vajjala, K.S., Sengupta, T.K., Mathur, J.S.
Effect of surface roughness on the solar photothermal conversion efficiency of spray-coated CuCo2O4 films James, A., Pradeep, P., Barshilia, H., Kamble, V.B.
Damage Tolerance Capability of Retrogression and Re-aged 7010 Aluminum Alloy Under FALSTAFF Loading Nandna, M.S., Bhat, K.U., Manjunatha, C.M.
El niñouthern oscillation (ENSO) impact on tea production and rainfall in south India Raj, E.E., Kumar, R.R., Ramesh, K.V.
Selective properties of high-temperature stable spinel absorber coatings for concentrated solar thermal application Atchuta, S.R., Sakthivel, S., Barshilia, H.C.
Radar Absorbing Structures Using Frequency Selective Surfaces: Trends and Perspectives Narayan, S., Sreeja, J., Surya, V.V., Sangeetha, B., Nair, R.U.
Transport properties of p-type Ca3-xLnxCo4O9-Ag (Ln = Lu, Yb; 0.1=x=0.2) oxides Bose, R.S.C., Nag, A.
Surface optimization of CVD grown silicon carbide interlayer on graphite for plasma sprayed yttria topcoat Madhura, B., Vetrivendan, E., Rao, C.J., Udayakumar, A., Ningshen, S.
Trigger-free self-healable electromagnetic shielding material assisted by co-doped graphene nanostructures Menon, A.V., Choudhury, B., Madras, G., Bose, S.
Citrate combustion synthesized Al-doped CaCu3Ti4O12 quadruple perovskite: Synthesis, characterization and multifunctional properties Pal, K., Dey, A., Jana, R., Ray, P.P., Bera, P., Kumar, L., Mandal, T.K., Mohanty, P., Seikh, M.M., Gayen, A.
Processing of Cf/SiC composites by hot pressing using polymer binders followed by polymer impregnation and pyrolysis Stalin, M., Rajaguru, K., Rangaraj, L.
Microstructural evolution in AlMgSc alloy (AA5024): Effect of thermal treatment, compression deformation and friction stir welding Chhangani, S., Masa, S.K., Mathew, R.T., Prasad, M.J.N.V., Sujata, M.
Electrospinning of cellulose acetate nanofiber membrane using methyl ethyl ketone and N, N-Dimethylacetamide as solvents Naragund, V.S., Panda, P.K.
Speech Corpus Development for Voice-Controlled MAV Rahul, D.K., Veena, S., Lokesha, H., Lakshmi, P.
Impact and acoustic emission performance of polyvinylidene fluoride sensor embedded in glass fiber-reinforced polymer composite structure Jain, A., Minajagi, S., Dange, E., Bhover, S.U., Dharanendra, Y.T.
Rudimentary emulation of covert feathers on low-ar wings for poststall lift enhancement Arivoli, D., Singh, I., Suriyanarayanan, P.
Speech interface for controlling micro air vehicle Lakshmi, P., Veena, S., Rahul, D.K., Lokesha, H.
EM Design of Low RCS Proximity Coupled Patch Array Singh, A., Sasidharan, D.K., Singh, H.
On the Recurrence Signatures of Flapping Wings Exposed to Gusty Simple Shear Flow De, M.M., Mathur, J.S., Vengadesan, S.
A multi-segment morphing system for a micro air vehicle using shape memory alloy actuators Kamalakannan, G.M., Singh, G.K., Ananda, C.M.
Co-fired anode-supported solid oxide fuel cell for internal reforming of hydrocarbon fuel Senthil Kumar, S., Jayaram, V., Aruna, S.T.
Properties of PVDF films stretched in machine direction Roopa, T.S., Murthy, H.N.N., Harish, D.V.N., Jain, A., Angadi, G.
Influence of Post-Weld Processing Techniques on Laser Beam-Welded Al3Mg0.25Sc Alloy Sheets Barat, K., Panbarasu, K., Bathe, R., Venkateswarlu, K.
Electrochemical and Exfoliation Corrosion Behavior of Reversion-Treated High-Strength Aluminum Alloy Nandana, M.S., Bhat, K.U., Manjunatha, C.M., Arya, S.B.
Study of design modification effects through performance analysis of a legacy gas turbine engine Gantayata, G., Sankar, B., Iyengar, V., Soumendu, J.
Rankine vortex formation during draining: A new twin port suppression strategy Prabhu, M., Kumar, R.A., Gopikrishnan, T.H., Deshpande, P.J., Anandhakrishnan, U., Kiran, A.S., Govindu, R.P.
Correction to: Frequency domain approach for probabilistic flutter analysis using stochastic finite elementsKumar, S., Onkar, A.K., Maligappa, M.
Influence of heat treatment on near-threshold fatigue crack growth behavior of high strength aluminum alloy 7010 Nandana, M.S., Udaya, B.K., Manjunatha, C.M.
Effect of Microstructure on the Fatigue Crack Growth Behavior in AlZnMgCu Alloy Nandana, M.S., Udaya, B.K., Manjunatha, C.M.
Ferroelectric Phase Transitions of Modified [(Na0.5Bi0.5)1 xLa x]TiO3 (x = 00.1) Sodium Bismuth Titanate-Based Ceramics Politova, E.D., Strebkov, D.A., Mosunov, A.V., Golubko, N.V., Kaleva, G.M., Stefanovich, S.Y., Loginov, A.B., Loginov, B.A., Panda, P.K.
Effect of Electrolyte Temperature and Anodization Time on Formation of TiO2 Nanotubes for Biomedical Applications Mohan, L., Dennis, C., Padmapriya, N., Anandan, C., Rajendran, N.